2020/4/2 10:11:36

Where to custom +rubber band bracelet maker

e it according to customer’s request for free. 2 make the mould The mould is made by the artwork that is confirmed by customer. A mould is made from copper usually. It is a necessary step to start production. 3 Color and rubber mixing This is the step to prepare the raw material of the bracelet.  We have to make the color as the pantone color customer wants. 4 weighing Commonly 5.5g per bracelet. 5 start production Set the mould on the machine and warm up to needed tempreture. 15k pcs bracelets can be done in 1 day by 1 machine. 6 edge cutting Use the machine to cut the extra part of the bracelet and divice the bands made by one mould. 7 quality inspection The defective must be picked out before packing. 8 packing and dilivery The bulk packing is 100pcs/ bag, 2500pcs/ctn. There can be individually wrapped if customer request. We have the confirm the dilivery details before dispatching.       cool-bracelets-to-make-with-rubber-bandsdesign-your-own-rubber-bracelet-online

step ,we will make a digital proof depends on the order information and send it to customer to confirm it .If the digital proof is not ok ,we will revised it and rubber band bracelet makersend it to customer again .We will satrt the mass production until the customer confirm the digital proof .The second step ,we need to prepare silica gel and use the promotional machine to produce the blank wristband and trim the edge of the blank wristband .At the same time ,we need to produce the screen printing plate out and printed the logo and message on the band surface through it .When we finished the printing process ,we will put the printed wristband in oven to bake it .When the ink is dried ,the printed wristband is finished .About the logo and message color ,we can make it with one color ,two colors ,three colors of CMYK color .By the way ,if we want to peoduce the printed wristband ,the thickness of the line of the logo need to reach 0.1 mm ,otherwise the screen printing plate can’t be produce outrubber band bracelet maker .   After reading this article, I believe you have a general understanding of printed wristband .If you want to know more about the printed wristband ,please contact us when you feel free . colored-rubber-bands-for-braceletscolor-filled-wristband

star wars rubber band bracelet